Audio Solutions Question of the Week: How Do I Set Up My AT-LP60 Turntable?

Many audiophiles still swear by the sound produced by vintage stereo receivers. Even though some of these receivers can be 30 years old or more, those in good condition still produce sound that can rival or even exceed some high-end digital units. Good quality vintage receivers are still available, and with a little research, it can be the heart of any audio system. While many of these receivers were designed to be mounted in stacks much like modern components, they do present some unique requirements that make setting one up properly a different proposition than simply sliding it into any open space in an entertainment center. However, for any user willing to take the time to set one up, a vintage stereo receiver can provide thousands of hours of unmatched listening pleasure. Overview of Vintage Stereo Receivers There are some listeners to whom it may make little or no sense to buy a vintage stereo receiver in place of a more modern digital unit. They cite the relative paucity of features, the different design aesthetic, and the vintage receiver’s proudly analog nature as all reasons to avoid the vintage technology and stick with a current receiver.

Guide to the Next Generation of Hi-Fi Stereo Systems

This SONY is a surround sound receiver with digital signal processing and 5 channel amplifier. There are 6 inputs: Repaired, Tested in every detail, reliably working, except that a couple of the turner pre set buttons at times trigger the wrong pre-set. Work performed to rework this unit:

The receiver is a H/K AVR and it doesn’t have an input specifically designated for phono. I already had the designated audio inputs hooked up to CD player and cable audio, so connected turntable to a one of the video audio inputs.

Plus the front panel USB port is ready for the newest sources for music: The VSX K also features Pioneer’s exclusive Multi-Channel Acoustic Calibration system MCACC , providing an optimized multi-channel listening experience by measuring every speaker’s connection, noting its size and distance from the listening point, sound levels and timbre in order to calibrate, customize and maximize performance specifically for your room.

With the unique Front Stage Surround Advance feature, you experience a virtual surround sound environment. By filling in areas where minute details were left out during the compression process, even audio like WMA, MP3 and AAC is enhanced with another Pioneer exclusive, Advanced Sound Retriever, letting you enjoy near CD quality sound from compressed music sources.

There’s also an Auto Level Control, equalizing volume differences between portable audio tracks or television programming and eliminating jarring volume changes. Which means the only thing that shocks you is how good it sounds. Not only do you get the most out of existing movies and music, with the VSX K you’re prepared for the new generation of 3D video content. With 4 HDMI inputs, you have plenty of connectivity options for the growing number of high-definition sources available.

Trouble connecting my Stanton Turntable and Yamaha Receiver to Sonos via Line-in

Sponsored post – log in to remove this ad. One vintage Yamaha P turntable. The turntable arm lifts, returns and shuts off the turntable after the record is finished playing.

With a back panel riddled with connections, a front panel speckled in all manner of buttons, and an array of different wires needed to get everything all hooked up, a receiver can be an.

I was thinking of buying another turntable that is more current – some of these do 78s, like the turntables they sell at barnes and noble. But I was wondering about sound and money is a concern. Have been told that the Technics sl is a good turntable so I was planning to order a needle for it even though it doesn’t do 78s. Trying to decide this morning what to do and am about to go meet the guy selling the receiver.

What sucks is I have a nice receiver already, the Sony str de , it just won’t take phono inputs. This guy is selling the one posted above, the Technics sa g So I guess I have to buy the Technics receiver and get rid of the Sony. Is that the best way to get the fullest sound from these albums? Because I can probably get set up to do that, if it is. I’d like to avoid any unnecessary compression if possible as long as the file sizes remain workable. Do you have 78s? I’m no spring chicken but 78s were well before my time.

I started collecting albums in the early 70s and I’ve never owned one.

Saved Items

If you try to connect a turntable to your sound card, you obviously get a buzzing noise. Normally people would think thats line noise or distortion, but it isn’t. What most people, including myself until I read up on it, is that the signal strength that is output by a turntable is incredibly lower than a cd or dvd player, tape player, video recorder, you get the picture. Which of course everyone has already touched on but here’s the problem.

Aug 31,  · The distinguishing “new” feature for this stereo receiver is the addition of Bluetooth technology for streaming music. Coupled with Yamaha sound quality and an attractive price, the R-S can be a young audiophiles (I’m talking to you, college boy) ticket to Musicville.

First let’s take a look on the cable that connects the turntable to the receiver. This cable is shown on Figure 1. It has three plugs on each end, one red or yellow RCA standard, one white or black RCA standard and one ground wire with an “Y” shaped terminal. Cable used to connect your turntable to your receiver. Locate on the rear of your turntable were the plugs are connected. You will find two female RCA connectors and one thumb screw to connect the ground wire, see Figure 2.

The correct grounding is very important, because if this wire isn’t connected or has a bad connection you will get noise “hum” noise. This color scheme for cable connection will be the same from here on. Turntable with its cable correctly installed. The other end of the cable you will need to connect to the receiver. You cannot connect your turntable directly to your PC, you must use a receiver. There are two issues involved.

First, the impedance from the turntable output and the sound card input are different, which means that the sound level will be very low.

Can you hook a turntable up to a surround sound system?

When was the last time you had anything hooked up to the tape monitors? If you are like me you ditched your cassette deck years ago It would not have occurred to me to attempt to connect the Little Dot to the headphone jack of the Yamaha, but in theory that should work no differently than connecting to the headphone jack of your iPad note it would be better to access a line out signal from your iPad via some sort of docking device. Sounds like the Yamaha’s headphone circuit may be shot.

Do you hear noise and distortion if you hook up your headphones directly to the Yamaha headphone jack too? I would think it is pretty unusual for the headphone circuitry and both tape monitors to fail in the same unit.

Introducing the Pioneer VSXK AV Receiver. With watts of clear audio reproduction and state-of-the-art technology, the new VSXK is the perfect entry-level receiver to let you experience Pioneer’s heritage of quality sound reproduction and innovative technology in your home system.

But, as with most professional gear, proper setup is critical to getting the most out of the AT-LP USB and ensuring long-lasting operation of the stylus and enjoyment of your records. The first order of business is to put all the pieces in place. So set the platter and slip mat onto the turntable spindle, making sure the platter is fully seated.

Next, lock the tone arm in place in the tone arm rest and attach the headshell assembly by inserting it into the end of the tone arm. While continuing to hold the headshell, rotate the locking ring on the tone arm counterclockwise to pull the headshell securely into place. Now install the counterweight. With the black stylus force gauge facing forward, screw the counterweight onto the back of the tone arm. Then, if you intend to use the dust cover, slip its hinges into the slots on the back of the turntable and slide the cover into place on the hinges.

Once you have all that taken care of, you can move on to the important matter of balancing the tone arm. To get started set the anti-skate dial to 0. Remove the protective cover from the stylus by sliding it straight forward off the front of the cartridge. The tone arm will be unbalanced at this point, so take care not to damage the stylus by letting it come into contact with the slip mat or anything else.

While continuing to gently hold the headshell, rotate the counterweight until the tone arm is horizontally balanced — it should hover just above the platter.

Setting Up the AT-LP120-USB Turntable – Part 1

Why connect a turntable to the Sonos system? You might be wondering why I would want to take a nice, warm analog turntable and connect it a digital speaker system. Well, for starters, it saves a lot of space by getting rid of a large amp and extra speakers. Will your turntable work? The first thing you need to figure out is if your turntable has a built-in preamp. Most newer models with USB outputs and some higher end models have built-in preamps.

Turntable hook up receiver – If you are a middle-aged man looking to have a good time dating man half your age, this article is for you. Rich man looking for older man & younger man. I’m laid back and get along with everyone.

Easy to set up and use – great sound and great build quality. Really happy with this purchase and the help and support offererd by Richer Sounds staff in Newcastle who were very knowledgable and incredibly helpful. No issue setting it all up, the hassle being with DPD failing to deliver the product and bashing the box a fair bit. Packaging seems to have saved the day, but I would recommend collection from store rather than trusting DPD.

I thought this would be a good way to get back into vinyl. Putting it together and setting it up was easy and, as always, great help and experience from the staff at Richer Sounds, London Bridge. The whole plinth is made of plastic, the platter is light weight and also the power button is in the most awkward place at the back. The sound quality to me wasn’t up to much quite thin sounding, not a lot of bass and not that clear on the treble.

Connecting a new turntable to surround sound/hifi system?

You may have seen this article, which mentions a couple of turntable choices for playing scratchy thrift- store vinyl. No spaces between letters. Why are some items missing the BUY button?

Best answer: It is only a 2 channel receiver but you can hook up as many speakers as the ohm rating will allow. You can hook up 2 speakers on channel A and 2 on channel B and play either channel A alone, B alone or both together but you will still only get 2 channel (stereo) sound.

Fresno, California duse said: I did a search and figure I could tie my question in to this thread, since technically it is a “Turntable to Receiver Question. I say “had” because I can further give a thumbs up to the statement “Absolutely nothing good can happen when you mess with stuff that is powered on I was able to quiet the hum to nil once I got the grounded wire situated.

I put on the reissue of Gish. I’ve done some research and cannot determine what the problem could be. I understand that “louder is not better,” but it goes further than that. I had noticed it with the other amp, but not to this level. I am not sure what type of cartridge that ECD is. It is not listed on AT’s site. I read that one type is quieter than another, but then again, that is not such a bad thing.

Back to basics: The Yamaha R-S201 stereo receiver

I try to ground all of my conclusions in both objective and subjective data from testing, and in the experience gained during the hundreds of hours a year I spend evaluating and comparing audio products. Who should get this This guide is designed for the person who is either first getting into vinyl playback, or has been out of it for a while and wants a simple solution. Many of the turntables discussed here feature integrated phono preamps, which is important because signals from phono cartridges must be amplified and equalized to be compatible with normal stereo systems or powered speakers.

Most new entry-level receivers lack phono preamp sections, and soundbars and wireless speakers never had them, so a built-in preamp can be important. There are plenty of used turntables out there that are great, but those can take some work and fine care to optimize their playback.

Dec 06,  · Hello This is my first post to this forum and I sincerely hope to find my answer here from you Audio experts. here is: I have: Marantz Receiver b (w/ pre-out, main-in jacks also tape monitor).

I have owned this since June of and it is used almost every day by either me or my wife. We have enjoyed hearing vinyl again and have expanded our collection with classic Read complete review I have owned this since June of and it is used almost every day by either me or my wife. We have enjoyed hearing vinyl again and have expanded our collection with classic albums and new gram reissues.

The USB that came with it was a little short to my liking but I bought a longer one for about 7 bucks on Amazon. The tonearm took some time to set up just right but I watched the many helpful videos on YouTube by Audio Technica and some more by fans of this TT. This model comes with the AT95E stylus which tracks at 2 grams. The previous stylus no longer comes with the LP The direct drive can stop on a dime!

Did you know that your browser is out of date?

It’s hard to pick a table because of how many tables offer attractive designs, great features, and build quality. U-Turn, Pro-ject, Technics, and many other brands all offer great products. Great reviews indicated almost unanimous satisfaction with the table, and the Denon name has been associated with quality products for years.

Great specs and a clean look paired with automatic operation made this table an obvious winner in its price bracket.

Set up your AT-LP60 Turntable with these tips from the Audio Solutions Team in this week’s Question of the Week blog. How Do I Set Up My AT-LP60 Turntable? Audio-Technica 55 Comments. Question: How do I set up my AT-LP60 turntable? Connect the turntable’s permanently attached power cord to an AC outlet with the proper.

Advantage Drive motor is mounted away from the floating platform, reducing vibration caused by the motor. Drive motor is directly mounted to the rotating platform. RPMs are more consistent, reducing jitter and skew. Most common configuration of tone arm pivots along an arc; lower cost, fewer active parts. Disadvantages Belts age and can gain slack, adding distortion to the rate of playback.

Loose belts can commonly be replaced. Drive motor is less insulated from the rotating platform, increasing the susceptibility of the motor to cause interference of distortion. Slight variation between mastering method and playback tone arm path can introduce negligible rate errors. Many records are now mastered with compensation for rotating tone arms, eliminating the original advantage.

Connecting your newly acquired turntable and other random turntable recommendations


Hi! Do you need to find a sex partner? Nothing is more simple! Click here, registration is free!